Miniprof > Products > (Čeština) Olepovačky hran > Pneufix A, Pneufix B and Pneufix C – for fixing the workpiece

(Čeština) Olepovačky hran

Pneufix A, Pneufix B and Pneufix C – for fixing the workpiece

Pneufix AC

Create your own professional MINIPROF edgebanding workplace with pneumatic MINIPROF Pneufix A, Pneufix B and Pneufix C suction cups, hand-held MINIPROF RAMBO edgebander and hand-held MINIPROF Final milling machine.

Pneumatic positioning MINIPROF PNEUFIX suction cup is intended for firm and fast fixing of non-porous materials (wood, laminate, plastic, etc.) and its subsequent processing (edgebanding, milling, drilling, grinding, etc.).


The main advantage of Pneufix A, Pneufix B and Pneufix C suction cups is the way of creating a vacuum using an integrated Venturi system, which makes the workpiece to be stuck by compressed air from a classic compressor unit.

With this pneumatic fixing system the edgebanding of straight and shaped pieces is very simple and does not require any cooperation from other employees.

We offer three types of the suction cup: Pneufix A, Pneufix B, and Pneufix C.

Pneufix A

is a stand-like suction cup designed for fixing the machined workpiece elevated above the workbench.

Pneufix A

Pneufix B is NEW

stand-like suction cup which enables fixing the workpiece not only horizontally, but also vertically and at a 45° angle on each side as well as rotation on its axis by 360°. This simple solution makes the work a lot easier and more comfortable.

Pneufix B can be easily secured to a table or work surface by clamp or supplied clamping screw. Edgebanding of straight and shaped pieces is thus very simple and does not require any cooperation from other employees.

The Pneufix B suction cup is supplied with a gasket set of 4 pieces for fixing small pieces.

You can easily connect several Pneufix B suction cups together = secure fixing of larger parts.

Pneufix B
Pneufix B
Pneufix B
Pneufix B

Pneufix C

is a suction cup that is mounted directly onto the surface of your workbench both horizontally and vertically.

The suction cup is attached to the workbench using four screws.

Pneufix C

 

Technical specification Miniprof Pneufix A

Maximum load 150 kg
Height x width x length 250 x 165 x 205 mm
Air consumption 23NI/min at 0.6MPa
Material PE/polyamid + steel protected with powder baked paint
Weight 3 815 g

Technical specification Miniprof Pneufix B

Maximum load 150 kg
Height x width x length 195 x 167 x 320 mm (dimension suction cup incl. valve)
Air consumption 23NI/min at 0.6MPa
Material PE/polyamid + 5 mm steel protected with powder baked paint
Weight 4 000 g

Technical specification Miniprof Pneufix C

Maximum load 150 kg
Height x width x length 25 x 165 x 205 mm
Air consumption 23NI/min at 0.6MPa
Material PE/polyamid
Weight 325 g